Hi,
Can someone tell me the correct seat back attachment for the 82B cab?
I have 2 clips welded to the back of the cab (white arrows) which look like the seat should hang from, but what goes on the bottom?
I have these clips shown in the picture, but not sure what they are for.
Any guidance is appreciated.
Thanks,
Dave
Seat Back Attachment
-
- Posts: 1445
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: Seat Back Attachment
The three items on the left are for the doors. https://www.brattons.com/INSIDE-DOOR-RO ... nfo/32110/
Found the pictures for the seat back retainers.I think Neil posted these.
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Seat Back Attachment
Tell me about the WLA with sidecar.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Seat Back Attachment
FYI - My research shows that there were four of the upper retainers welded to the cab back and three lower retainers (one for each support board).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Seat Back Attachment
Thanks All.
Neil, would those welded on hooks only be up until late 1930 and then transition to the other style that Bob C posted?
My truck is a February 1931, but I have 2 of the welded on versions.
(Chris, good eye, the WLA w/sidecar is next in line after I finish the AA, then the Kettenkrad).
Dave
Neil, would those welded on hooks only be up until late 1930 and then transition to the other style that Bob C posted?
My truck is a February 1931, but I have 2 of the welded on versions.
(Chris, good eye, the WLA w/sidecar is next in line after I finish the AA, then the Kettenkrad).
Dave
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Seat Back Attachment
Dave, My information regarding dates is based on observation (not Ford documentation). So, did Ford change from 4 to 2 weld-on-retainer hooks and when the conversion to bolt-on retainers occurred is not backed by Ford documentation.dlevy wrote: ↑March 27th, 2022, 10:30 pmThanks All.
Neil, would those welded on hooks only be up until late 1930 and then transition to the other style that Bob C posted?
My truck is a February 1931, but I have 2 of the welded on versions.
(Chris, good eye, the WLA w/sidecar is next in line after I finish the AA, then the Kettenkrad).
Dave
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/