29 AA restorod

[Radar]

Heres some more! I think Im addicted to this now that I got it working. Radar

[A-Town Bob]

Looks good.......
Did you box the frame, or will it be sturdy enough?

[Radar]

Bob, the frame is boxed from the front crossmember to the motor mounts and in the rear where I c'ed the frame for axle clearance. The center of the frame is plenty strong enough to handle the weight and tourque of my build. I'm tearing it down for paint and will post some pics. If anyone wants to know what all parts I used I can list them for you. Radar

[Radar]

Thanks for all the positive comments! Wasn't sure if my project would be accepted here. Radar

[Radar]

It's been quite awhile so heres an update. The chassis is complete and painted,the brakes work,engine and trans installed,and the steering works well. I built a steel floor from 16ga scrap. I'll try some pic. Radar

[Chris Haynes]

Do you have the original firewall?

[spectria]

It's been quite awhile so heres an update. The chassis is complete and painted,the brakes work,engine and trans installed,and the steering works well. I built a steel floor from 16ga scrap. I'll try some pic. Radar

Looking very good!

[Radar]

Yes Chris but I used it in reconstructive surgery. The orginal setback for the engine is now the hump to clear the bellhousing and the ends are still in the firewall.

[Radar]

Here's a couple of more pics. we're making some progress! Radar

[carnut14]

great work!

I was looking at the clereance between the front axel and the ubolt nuts. (mine hit). It appears you have a reversed eye spring and a stock cross member? is there a spacer above the spring?

[Radar]

Its been quite a while but after spending a couple of years on the road building roads I fired up my hot rod AA last week !!! What a great feeling hope to have it on the road this year !!

[Radar]

The end result of many years of work !

[Radar]

More !

[Radar]