I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.
I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.
Looking for the following AA parts
- mikeg
- Site Admin
- Posts: 179
- Joined: January 15th, 2003, 4:08 pm
- Body Type: 150B
- Model Year: 1930
- Location: San Juan Islands, Washington
- Contact:
Re: Looking for the following AA parts
I found the speedo gear from the "Tired Truck Resotrations" guy, $50 plus $4 shipping.mikeg wrote:I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.
I have the shutoff valve and the line, still looking for the carb mounted filter.mikeg wrote:I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.
-
- Posts: 92
- Joined: January 16th, 2003, 2:45 pm
- Body Type: 82A Cab 89A Express
- Model Year: 1929
Speedo Driven Gear
Mike,
Did you try Keith Ernst, 25 Springhouse Lane, Orwigsburg, PA 17961??
I beleive that he is making repros driven gears or had several made. That's where I got one for my AA. $50.00 plus shipping. Total to Virginia was $54.00.
trdtruck@pottsville.infi.net is his e-mail.
Good Luck,
Bradshaw
Did you try Keith Ernst, 25 Springhouse Lane, Orwigsburg, PA 17961??
I beleive that he is making repros driven gears or had several made. That's where I got one for my AA. $50.00 plus shipping. Total to Virginia was $54.00.
trdtruck@pottsville.infi.net is his e-mail.
Good Luck,
Bradshaw
- Neil Wilson
- Posts: 3063
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
I think that Tom Godish in Portland has the rear axle bumpers. Tom should be at "Model A Ford Works" 503-284-1928
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
-
- Posts: 6
- Joined: July 24th, 2004, 10:00 pm
- Model Year: 1930
- Location: La Honda, CA
- Contact:
Re: Looking for the following AA parts
I have a nice original fuel shut off if you still need it. jdavis@amuffler.commikeg wrote:I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.
I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.