any experience with EVAPORUST?

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Posts: 410
Joined: October 8th, 2013, 2:37 pm
Body Type: AA express
Model Year: 1928

any experience with EVAPORUST?

Post by birdacre » August 2nd, 2017, 10:55 am

sounds like a neat product. my concern is scale and rust breaking loose and clogging a new radiator. there is a product out there now just for cooling systems. ideas, comments?

User avatar
Chris Haynes
Posts: 2021
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: North Hills, CA/ Pine Grove, CA

Re: any experience with EVAPORUST?

Post by Chris Haynes » August 2nd, 2017, 3:51 pm

I used RUST 911 in my cooling system. Part of a nylon stocking in the upper radiator hose caught some of the dissolved rust. Anything that passed through the nylon wouldn't have been big enough to block anything.
I filled the cooling system with the RUST 911 and drove it for a few days. Drained and flushed the system. Refilled with RUST 911 again for a few days and flushed again.
The temp gauge on my car always stays in the "Operating Range" in over 100 degree weather and while in a parade.

Post Reply