AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
-
bobmay1
- Posts: 39
- Joined: October 26th, 2017, 4:16 am
- Model Year: 1930
Post
by bobmay1 » January 11th, 2018, 3:28 pm
I recently picked up a warford overdrive with almost perfect gears. I want to do a complete rebuild. Is there any source for gaskets or bearings?

Sent from my iPhone using Tapatalk
-
njcar757
- Posts: 76
- Joined: March 4th, 2009, 4:00 pm
- Body Type: closed cab
- Model Year: 1929
Post
by njcar757 » January 15th, 2018, 8:14 am
It would help if someone could post a schematic of all the parts and part numbers and part name. When you view the schematic, you need to know that part # 2038 and part number 1342 are reversed and in the wrong place. Hope you got the thrust washer 2038 if not I've posted the dimensions before on this forum. I rebuilt mine 5 yrs ago, most likely only the top shaft bearings have wear on them. Bearing #1342 I bought on ebay # 6210 with no seals cost $13.00. Bearing #1339 bought on ebay #6307rs, it has 2 seals remove only the one on inside of transmission.
good luck, carry on nick c
-
Chris Haynes
- Posts: 2027
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: North Hills, CA/ Pine Grove, CA
Post
by Chris Haynes » January 15th, 2018, 12:04 pm
Generally speaking products are designed to use bearings already in use. Take your bearings to a bearing supply and have them match them for you,