AA piston ring question

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
rugb
Posts: 5
Joined: November 30th, 2008, 12:36 pm
Model Year: 1929

AA piston ring question

Post by rugb » February 19th, 2019, 7:53 am

I’m rebuilding an engine for a ‘29 AA Ford and running into something maybe someone else has?? Bored to .100 over and am finish honing to fit the pistons. Don’t have rings yet so going to order them. What I am finding out is the ring grooves aren’t as deep as the original pistons. These are .166” and the original are like .218”. So contacting Hasting they say their rings won’t fit. I don’t know much about these .100 over pistons except they are NOS with a brand of Hy-Duty (HP Corp) and number 4-101P.
Does anyone have a set of new rings that they could measure the depth? Trying a used ring from an old piston that was originally in this engine, it fits in the groove of my new piston with plenty of depth. Of course there is wear on the used ring. Thanks for your help

KimVanOrder
Posts: 510
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: AA piston ring question

Post by KimVanOrder » February 19th, 2019, 3:29 pm

You can re-cut the pistons to fit different rings. Just don't go too deep. :shock:
KVO
Dec. '28 AA

Post Reply